Embedded systems


In embedded systems software, hardware and all mechanical components are optimized to suit the end product perfectly without compromise, but with great attention to feasibility. These criteria can make honing in on an end product a very demanding task.

Our experience in the field of embedded systems led us to the conclusion that systems like these can become perfect only if all aspects of it (software and hardware) are designed as a whole.

This was the reasoning behind our decision to have hardware- and mechanical design in-house, and this is the reason Andrea Software can create exactly what the clients require.

Products we work on pass all tests for product safety, electrical, and climatic conditions.

We have experience in an array of architectures, such as ARM, RX, RL78, 8051, ARC and many more.

G3-PLC facilitates high-speed, highly-reliable, long-range communication over the existing powerline grid. The features and capabilities of G3-PLC have been developed to address the difficult challenges of powerline communications.

The standard language for smart devices. DLMS/COSEM provides a globally accepted standard language for smart devices that ensures interoperability, efficiency and security.

Wireless Smart Utility Network is a wireless communication standard that enables seamless connectivity between smart-grid devices. The standard powers large-scale outdoor IoT networks like wireless mesh networks for Advanced Metering Infrastructure (AMI), home energy management, distribution automation, and other large scale outdoor network applications.

Zigbee is an IEEE 802.15.4-based specification for a suite of high-level communication protocols used to create personal area networks with small, low-power digital radios, designed for small scale projects which need wireless connection.

LoRaWAN is a cloud-based medium access control (MAC) layer protocol but acts mainly as a network layer protocol for managing communication between LPWAN gateways and end-node devices as a routing protocol, maintained by the LoRa Alliance.

Inter-Integrated Circuit is a serial communication protocol. Data is transferred bit by bit along a single wire.

Serial Peripheral Interface is a synchronous serial communication interface specification used for short-distance communication, primarily in embedded systems.

A Controller Area Network is a robust vehicle bus standard designed to allow microcontrollers and devices to communicate with each other's applications without a host computer.

A universal asynchronous receiver-transmitter is a computer hardware device for asynchronous serial communication in which the data format and transmission speeds are configurable.

A universal synchronous and asynchronous receiver-transmitter is a type of a serial interface device that can be programmed to communicate asynchronously or synchronously.

Transmission Control Protocol is one of the core protocols of the Internet protocol suite that provides reliable, ordered, and error-checked delivery of a stream of octets (bytes) between applications running on hosts communicating via an IP network.

User Datagram Protocol is one of the main members of the Internet protocol suite. With UDP, computer applications can send messages, to other hosts on an Internet Protocol (IP) network. Prior communications are not required in order to set up communication channels or data paths.

Modbus is a data communications protocol that is popular in industrial environments because it is openly published and royalty-free. It was developed for industrial applications, is relatively easy to deploy and maintain compared to other standards, and places few restrictions.

RS-422, also known as TIA/EIA-422, is a technical standard originated by the Electronic Industries Alliance that specifies electrical characteristics of a digital signaling circuit. It was intended to replace the older RS-232C standard with a standard that offered much higher speed, better immunity from noise, and longer cable lengths.

RS-485, also known as TIA-485(-A) or EIA-485, is a standard defining the electrical characteristics of drive rs and receivers for use in serial communications systems. Electrical signaling is balanced, and multipoint systems are supported.